NEETI engineering entrance exam 2018 Application procedure and Last date?

3 comments
According to the reports of AICTE, Most of the colleges are sending out a large number of engineering graduates who are unemployable. So, to improve the standards of technical education MHRD plans to conduct a single engineering entrance exam called NEETI.

What is NEETI?
National Entrance Examination for Technical Institutions (NEETI) is a single entrance exam conducted by National testing service(NTS) for admission into engineering programmes .

When will be the entrance exam?
NTS will be ready to conduct NEETI by JAN 2018, It will be conducted multiple times in a year.
As per plan, the first NEETI exam is going to schedule on DEC 2017,JAN 2018
Second exam is on MARCH 2018
Third exam is on MAY 2018

Who sets the Question paper?
The paper will be set by IIT's

Who conducts exam?
NTS takes responsibilities to conduct exam.

Ref: http://indianexpress.com

3 comments :

Post a Comment

Different M.Tech courses or branches with high job opportunities related to ece in india

1 comment
mtech admissions
Job opportunities are more for VLSI,Embedded, Communications, Computer science and signal processing branches in reputed colleges like IIT’s,NIT’s and Top universities.
So,According to my opinion its better to take any of the five branches. Here I am not saying that the remaining branches have no job opportunities but when compared to the above five branches remaining branches have less opportunities. 

So,Try to get admission in any five course in reputed college, for that you need to get a good score in GATE exam. If you didn’t get any of the five branches don’t worry whatever branch your studying perform well in that branch then there is a chance of getting good job.

Different ECE M.Tech Branches

1. Digital Electronics & Communication
2. Signal Processing
3. Computers & Communications
4. VLSI System Design
5. Robotics
6. Computer science
7. Microwave & Radar Engineering
8. Communications Systems
9. Embedded Systems
10. Electronics Instrumentation and Comm.Systems
11. Image Processing
12. Micro electronics 
13. Mechatronics

1 comment :

Post a Comment

APGENCO 2017 Syllabus for ECE in pdf

No comments
APGENCO is one of the power generation company in Andhrapradesh state, they directly recruit AE based on the written test conducted by them,the written test consists of two sections
Part-A: Technical
Part-B: Aptitude

Here we are giving syllabus for electronics branch and trying to put previous papers with solutions soon,to get updates subscribe your email.

1. Basics of Circuits and Measurement Systems:
Kirchoff.s laws, mesh and nodal Analysis, Circuit theorems. One-port and twoport Network Function. Static and dynamic characteristics of Measurement Systems. Error and uncertainty analysis. Statistical analysis of data and curve fitting.
2. Transducers, Mechanical Measurement and Industrial Instrumentation:
Resistive, Capacitive, Inductive and piezoelectric transducers and their signal conditioning. Measurement of displacement, velocity and acceleration (translational and rotational), force, torque, vibration and shock. Measurement of pressure, flow, temperature and liquid level. Measurement of pH, conductivity, viscosity and humidity.
3. Analog Electronics:
Characteristics of diode, BJT, JFET and MOSFET. Diode circuits. Transistors at low and high frequencies, Amplifiers, single and multi-stage. Feedback amplifiers. Operational amplifiers, characteristics and circuit configurations, Instrumentation amplifier. Precision rectifier. V-to-I and I-to-V converter. Op-Amp based active filters. Oscillators and signal generators.
4. Digital Electronics:
Combinational logic circuits, minimization of Boolean functions. IC families, TTL, MOS and CMOS. Arithmetic circuits, Comparators, Schmitt trigger, timers and mono-stable multi vibrator. Sequential circuits, flip-flops, counters, shift registers, Multiplexer, S/H circuit, Analog-to-Digital and Digital-to-Analog converters. Basics of number system. Microprocessor applications, memory and input-output interfacing. Microcontrollers.
5. Signals, Systems and Communications:
Periodic and aperiodic signals. Impulse response, transfer function and frequency response of first and second order systems. Convolution, correlation and characteristics of linear time invariant systems. Discrete time system, impulse and frequency response. Pulse transfer function. IIR and FIR filters. Amplitude and frequency modulation and demodulation. Sampling theorem, pulse code modulation. Frequency and time division multiplexing. Amplitude shift keying, frequency shift keying and pulse shift keying for digital modulation.
6. Electrical and Electronic Measurements:
Bridges and potentiometers, measurement of R, L and C. Measurements of voltage, current, power, power factor and energy. A.C & D.C current probes, Extension of instrument ranges. Q-meter and waveform analyzer, Digital voltmeter and multi-meter, Time, phase and frequency measurements, Cathode ray oscilloscope, Serial and parallel communication, Shielding and grounding
7. Control Systems and Process Control:
Feedback principles. Signal flow graphs. Transient Response, steady-stateerrors. Routh and Nyquist criteria. Bode plot, root loci. Time delay systems. Phase and gain margin. State space representation of systems. Mechanical, hydraulic and pneumatic system components. Synchro pair, servo and step motors. On-off, cascade, P, P-I, P-I-D, feed forward and derivative controller, Fuzzy controllers.
8. Analytical, Optical Instrumentation:
Mass spectrometry, UV, visible and IR spectrometry, X-ray and nuclear radiation measurements. Optical sources and detectors, LED, laser, Photo-diode, photo-resistor and their characteristics. Interferometers, applications in metrology. Basics of fiber optics.


Downlaod syllabus:



No comments :

Post a Comment